Midwest Radio Association KØMSP

EchoLink

EchoLinkEchoLink permits licensed Amateur Radio stations to communicate with one another over the Internet using voice-over-IP (VoIP) technology, allowing worldwide connections to be made between stations or from computer to station. This greatly enhances Amateur Radio's communications capabilities. There are more than 200,000 validated users worldwide, in 151 of the world's 193 nations, with about 5,200 online at any given time. To access our 145.37 MHz Repeater, use KØMSP-R EchoLink Node 4537. KØMSP-L EchoLink Node 9975 can be used to access the KØMSP repeater on 444.975 MHz. Please use your call and location with initial connection. Click the following link for a list of current logins. Note: Please leave at least a four second gap between "overs" to allow time for all links to reset.


EchoLinking Example

EchoLink DTMF Functions

EchoLink can accept DTMF tone commands used to enable or disable the link or to connect or disconnect a station on the Internet. Each command consists of a sequence of digits (or the special keys *, #, and A through D). The table below lists each of the DTMF commands.

Command
Description
Default
Connect
Connects to a station on the Internet, based on its node number.
num
Connect by Call
Connects to a station on the Internet, based on its callsign.
C+call+#
Random Node
Selects an available node (of any type) at random, and tries to connect to it.
00
Random Link
Selects an available link or repeater (-L or -R) at random, and tries to connect to it.
01
Random Conf
Selects a conference server at random, and tries to connect to it.
02
Random User
Selects an available single-user station at random, and tries to connect to it.
03
RandomFavNode
Selects an available node (of any type) at random from the Favorites List, and tries to connect to it.
001
RandomFavLink
Selects an available link or repeater (-L or -R) at random from the Favorites List, and tries to connect to it.
011
RandomFavConf
Selects a conference server at random from the Favorites List, and tries to connect to it.
021
RandomFavUser
Selects an available single-user station at random, and tries to connect to it.
031
Disconnect
Disconnects the station that is currently connected. If more than one station is connected, disconnects only the most-recently-connected station.
#
Disconnect All
Disconnects all stations.
##
Reconnect
Re-connects to the station that most recently disconnected.
09
Status
Announces the callsign of each station currently connected.
08
Play Info
Plays a brief ID message.
*
Query by Call
Looks up a station by its callsign, and reads back its node number and status.
07+call+#
Query by Node
Looks up a station by its node number, and reads back its callsign and status.
06+num

Midwest
Radio Association, Inc.
Minneapolis/St. Paul
KØMSP

Email
k0msp@mbei.com


 

QRZ Callsign Lookup: